Call Now: (866) 928-6611

The Best Water Heater Service in Yakima County, WA

Call Now for Water Heater Service:

Water Heaters in Yakima County

Lowest Cost Yakima County Water Heater Repair & Installation

Aptera's professional, experienced pros can tackle any issue with your water heater in Yakima County with quick repairs or replacement units. When your water goes cold, you see discolored water from the tap or hear clanking sounds from your heater, our experts are ready with same day water heater repair in Yakima County for both businesses and homeowners. Get started now or read below to see what it takes to become an Aptera partner and learn more.

At one point or another, burned out elements, sediment buildup, faulty thermostats, defective thermocouple, blocked vents, dip tube damage or a broken pressure relief valve will have you calling a repairman. Proper care, maintenance and selecting the right unit for your property all help reduce these occurrences. Aptera phone screened professionals are trained for every type of repair needed for all major brands and are ready 7 days a week.

Call Now for Pricing

Comparing Types of Water Heaters in Yakima, Sunnyside and Grandview, WA

Recent changes in the National Appliance Energy Conservation Act have increased the energy efficiency standards for residential water heating with gas, oil or electricity—meaning new water heaters will produce hot water using fewer resources. In addition to improvements made to models with conventional water storage tanks, consumers also have solar-powered, tankless, and combination space heater/water heater models to consider.

Conventional Storage Tank Water Heaters

Conventional water heaters act as a holding tank for heated water. Cold water flows into the tank and is heated by the fuel source (usually gas or electric). The water sits in the tank where it is monitored by a thermostat and kept hot until there is a call for it from a connected tap.

ProsCons
  • Multiple fuel options
  • Initial purchase is affordable
  • Simple design is easy to repair or replace
  • Wasted energy due to standby heating
  • Storage tank can be large/bulky
  • Lifespan shorter than tankless heaters

Fuel Type and Energy Efficiency

Conventional water heaters are most often fueled by natural gas or electricity. Models that utilize natural gas are less expensive to operate. LP and oil-fueled models are also available. Conventional models must meet the new EF (Energy Factor) standard of .62 or above, depending on the tank size and fuel source.

On Demand/Tankless Water Heaters in Yakima County

In a tankless unit, water is heated by electric coils or a gas burner as it moves through the heat exchanger.

ProsCons
  • Small size gives more installation options
  • Can last up to twice as long as a conventional model
  • Less wasted energy, only heating minimum amount of water necessary
  • Difficult to heat water for 3+ taps at once
  • Initial investment is higher than conventional models

Fuel Type and Energy Efficiency

Tankless models, like their traditional counterpart, can be fueled by natural gas, LP gas, oil, or electric. These models have an EF standard of .82 or greater.

Solar Water Heater

Using the sun’s natural rays absorbed by roof mounted panels as a power source, solar water heaters in Yakima County are the most environmentally friendly option available. Electricity from the power grid acts as a back-up so you never go without hot water.

solar water heater diagram
ProsCons
  • Free to operate, weather permitting
  • Gas or electric is used less often to heat water (backup only), resulting in lower bills
  • Most expensive upfront costs
  • Repairs and maintenance for “extra” parts could be costly

Fuel Type and Energy Efficiency

The SEF (Solar Energy Factor) standard is equal to or greater than 1.2 for a natural gas backup unit, 1.8 for an electric backup unit.

Coil Space Heater/Water Heater Combinations

Combination units use the heat produced by the home’s space heating system and a heat exchanger to produce hot water. Hot water is stored in a tank until there is a call from the tap.

ProsCons
    High efficiency units could lower monthly bills Multiple fuel options
  • Installation is lengthier/more complicated
  • Retrofitting could be costly

Fuel Type and Energy Efficiency

Working in combination with your home’s heating space heating source, both units utilize the same fuel. The EF standards are similar to traditional tank units; however, because most combination heaters are high-efficiency they will likely exceed the rated EF standards.

How To Get the Best Water Heater Contractor in Yakima, Sunnyside and Grandview

When your home has no hot water, your instinct is to work with the contractor who can get to you the fastest. However, taking just a few minutes to find the pro who asks questions, listens to your answers and educates you on your options will save time, money and headaches.

corroded water heater

You Ask We Answer

How Often Do I Need Service?

Regular inspections and annual flushing can prevent sudden, costly repairs.

It is Making a Lot of Noise But is Still Functioning, Do I Need to Worry Right Now?

This is usually an indication of sediment in the water tank. While you may still have hot water, it is not running as efficiently as it could. Having the tank drained and serviced will improve efficiency and could extend the life of your heater.

Does a Leaking Water Heater Have to be Replaced?

Yes, in most cases a leaking tank means cannot be patched. If a loose fitting is causing the leak however, it might be repairable.

How Long Will My Water Heater Last?

Depending on the model, most will last between 6 and 15 years, though 20 years is not uncommon with regular maintenance and parts replacement.

What Does the Warranty Cover?

This varies by manufacturer, but typically the warranty includes all parts and labor to repair or replace defective parts for the first full year from the date of installation. After the first year, the warranty usually provides coverage for the replacement of defective parts, but does not pay for the labor associated with installing the parts.

Are You Insured?

Liability insurance and workers’ compensation policies protect you from financial obligations stemming from damages or injuries that may occur while a contractor is working on your project. Ask the contractor for a certificate of insurance with you listed as the additional insured (your contractor can obtain this from the insurance agency at no additional cost).

Is a Permit Required For a New Installation?

Yes you need a permit to ensure installation is up to the municipality’s building codes. Aptera installation experts will explain the permit process and obtain the proper permit for you.

Tips for Reducing Your Water Heating Costs

Monthly heating costs can vary greatly depending on the age and model of your water heater, the fuel source used and the amount of hot water you use each day. Reduce waste and your costs by following the guidelines below:

For more details on energy efficiency requirements go to the US Department of Energy www1.eere.energy.gov/buildings/appliance_standards or the PHCC.

Yakima County Cities Served

Water Heaters Yakima, WA

Cost Less Energy

3409 Hillside Place
Yakima, WA 98903

Hull's Plumbing & Repair Service

14101 Mcinnis Ln
Yakima, WA 98903

Linden Electric Inc

9401 Mieras Rd
Yakima, WA 98901

Apex Plumbing

501 S 2nd Ave
Yakima, WA 98902

Avery Home Services

110 Sage Trail Rd
Yakima, WA 98901

Advanced Mechanical Elecl Inc

3150 Mapleway Rd
Yakima, WA 98908

Yakima Water Heaters Costs:

Yakima water heater installation costs $1,016, water heater repair costs $595.

Water Heaters Sunnyside, WA

Sunnyside Water Heaters Costs:

Sunnyside water heater installation costs $947, water heater repair costs $555.

Water Heaters Grandview, WA

Grandview Water Heaters Costs:

Grandview water heater installation costs $1,069, water heater repair costs $626.

Water Heaters Toppenish, WA

Toppenish Water Heaters Costs:

Toppenish water heater installation costs $860, water heater repair costs $503.

Water Heaters Selah, WA

Dr. Energy Saver

Po Box 1005
Selah, WA 98942

Selah Water Heaters Costs:

Selah water heater installation costs $852, water heater repair costs $499.

Water Heaters Wapato, WA

Wapato Water Heaters Costs:

Wapato water heater installation costs $1,000, water heater repair costs $585.

Water Heaters Moxee, WA

Moxee Water Heaters Costs:

Moxee water heater installation costs $1,085, water heater repair costs $635.

Water Heaters Granger, WA

Granger Water Heaters Costs:

Granger water heater installation costs $1,079, water heater repair costs $632.

Water Heaters Zillah, WA

Zillah Water Heaters Costs:

Zillah water heater installation costs $1,038, water heater repair costs $608.

Water Heaters White Swan, WA

White Swan Water Heaters Costs:

White Swan water heater installation costs $1,129, water heater repair costs $661.

Cost Less Energy

3409 Hillside Place
Yakima, WA 98903

Hull's Plumbing & Repair Service

14101 Mcinnis Ln
Yakima, WA 98903

Linden Electric Inc

9401 Mieras Rd
Yakima, WA 98901

Apex Plumbing

501 S 2nd Ave
Yakima, WA 98902

Avery Home Services

110 Sage Trail Rd
Yakima, WA 98901

Advanced Mechanical Elecl Inc

3150 Mapleway Rd
Yakima, WA 98908

Dr. Energy Saver

Po Box 1005
Selah, WA 98942
98901 | 98902 | 98903 | 98904 | 98907 | 98908 | 98909 | 98920 | 98921 | 98923 | 98929 | 98930 | 98932 | 98933 | 98935 | 98936 | 98937 | 98938 | 98939 | 98942 | 98944 | 98947 | 98948 | 98951 | 98952 | 98953 |

Water Heater Installation in Yakima County, WA

Water Heater Installation Yakima County, WA

Water Heater Repair in Yakima County, WA

Water Heater Repair Yakima County, WA

Tankless Water Heater Installation in Yakima County, WA

Tankless Water Heater Installation Yakima County, WA

Get Pricing on Water Heaters in Yakima County, WA

Yakima County Water Heater Installation

Water Heater Installation in Yakima County

Average Cost: $1,015
Starting At: $580

Show Less

CityAvg. CostLow CostHigh Cost
Cowiche $982$492$1,758
Grandview $1,069$519$1,523
Granger $1,079$514$1,364
Harrah $1,126$507$1,713
Mabton $926$504$1,705
Moxee $1,085$505$1,427
Naches $1,007$535$1,636
Outlook $964$475$1,499
Selah $852$532$1,538
Sunnyside $947$542$1,572
Tieton $892$465$1,335
Toppenish $860$451$1,789
Wapato $1,000$568$1,537
White Swan $1,129$589$1,604
Yakima $1,016$479$1,613
Zillah $1,038$543$1,449
Yakima County Water Heater Repair

Water Heater Repair in Yakima County

Average Cost: $594
Starting At: $159

Show Less

CityAvg. CostLow CostHigh Cost
Cowiche $575$135$1,306
Grandview $626$143$1,132
Granger $632$141$1,013
Harrah $659$139$1,272
Mabton $542$138$1,266
Moxee $635$139$1,060
Naches $590$147$1,215
Outlook $564$131$1,113
Selah $499$146$1,143
Sunnyside $555$149$1,167
Tieton $522$128$992
Toppenish $503$124$1,329
Wapato $585$156$1,142
White Swan $661$162$1,192
Yakima $595$132$1,198
Zillah $608$149$1,076
Yakima County Tankless Water Heater Installation

Tankless Water Heater Installation in Yakima County

Average Cost: $1,200
Starting At: $338

Show Less

CityAvg. CostLow CostHigh Cost
Cowiche $1,161$287$3,310
Grandview $1,264$303$2,868
Granger $1,275$300$2,568
Harrah $1,331$296$3,224
Mabton $1,095$294$3,210
Moxee $1,283$294$2,686
Naches $1,191$312$3,079
Outlook $1,139$277$2,821
Selah $1,007$310$2,896
Sunnyside $1,120$316$2,959
Tieton $1,054$271$2,513
Toppenish $1,016$263$3,368
Wapato $1,182$331$2,894
White Swan $1,334$343$3,020
Yakima $1,201$279$3,036
Zillah $1,228$317$2,727
Yakima County Solar Water Heater Installation

Solar Water Heater Installation in Yakima County

Average Cost: $1,238
Starting At: $342

Show Less

CityAvg. CostLow CostHigh Cost
Cowiche $1,198$291$3,737
Grandview $1,303$307$3,237
Granger $1,315$304$2,899
Harrah $1,373$300$3,639
Mabton $1,129$298$3,623
Moxee $1,323$298$3,032
Naches $1,228$316$3,476
Outlook $1,175$281$3,184
Selah $1,038$314$3,269
Sunnyside $1,155$320$3,340
Tieton $1,087$275$2,837
Toppenish $1,049$267$3,802
Wapato $1,219$335$3,267
White Swan $1,376$348$3,409
Yakima $1,239$283$3,427
Zillah $1,266$321$3,078